Users Guide

Switch Management Commands 2204
User Guidelines
After entering the view corresponding to a specific SYSLOG server, the
command can be executed to set the port number for the server.
If the port value is changed for a server, the configuration does not take effect
until the server is disconnected and reconnected.
Example
The following example sets the SYSLOG server port to 300.
console(config-logging)#port 300
show logging
Use the show logging command to display all logging information, including
auditing status and logging protocol version.
Syntax
show logging
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Command History
Updated output in version 6.5.
Example
The following example displays the state of logging and the SYSLOG
messages stored in the internal buffer.
console#show logging