Users Guide

Switch Management Commands 2207
Default Configuration
When enabling x509 authentication, a default (non-indexed) certificate pair
is used if present and no index was selected for the server.
Anonymous authentication does not use a certificate.
The default SYSLOG server port number is 514. When DTLS is configured
(logging protocol 1), the default port number is 6514.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the SYSLOG server settings.
console#show syslog-servers
IP address Port Severity Description
----------------------------------------------
192.180.2.275 14 Info 7
192.180.2.285 14 Warning 7
Transport Type Authentication Certificate Index
-------------- ----------------- -------------------
UDP
TLS X509 5
TLS Anonymous
terminal monitor
Use the terminal monitor command to enable the display of system messages
on the terminal for telnet and SSH sessions.
Syntax
terminal monitor
no terminal monitor