Users Guide

Switch Management Commands 2245
Syntax
show hardware profile portmode [interface-id]
Default Configuration
This command has no default setting.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command is not available on the N1100-ON/N1500/N2000/N2100-
ON/N3000/N3100-ON switches.
Examples
console#show hardware profile portmode
Configured Running
40G Interface 10G Interfaces Mode Mode
------------- -------------- ---------- -------
Fo1/0/1 Te1/0/25-28 1x40G 4x10G
Fo1/0/2 Te1/0/29-32 1x40G 1x40G
console#show hardware profile portmode fo1/0/1
Configured Running
40G Interface 10G Interfaces Mode Mode
------------- -------------- ---------- -------
Fo1/0/1 Te1/0/25-28 1x40G 4x10G
show idprom interface
Use this command to display the optics EEPROM contents in user-readable
format.
Syntax
show idprom interface interface-id
• interface-id—The Ethernet interface.