Users Guide

Switch Management Commands 2256
Syntax
show power-usage-history <unit-id>
• unit-id—Stack unit for which to display the power history. Range 1-12.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
Power draw is measured at the power supplies. Power draw is not measured at
the interfaces.
This command is not available on the Dell EMC Networking N1100-ON
Series switches.
Example
console#show power-usage-history 1
Sampling Interval (sec)........................ 30
Total No. of Samples to Keep................... 168
Current Power Consumption (Watts)............. 56.2
Sample Time Since Power Power
No. The Sample Consumption Consumption
Was Recorded On This Unit Per Stack
(Watts) (Watts)
------ -------------------- ----------- -----------
3 00:00:00:13 56.2 56.2
2 00:00:00:43 56.2 56.2
1 00:00:01:12 54.3 54.3
show process app-list
Use the show process app-list command to display the system applications.