Users Guide

Switch Management Commands 2281

1 PHY 34

show tech-support

Use the show tech-support command to display system and configuration

information for use in debugging or contacting technical support. The output

of the show tech-support command combines the output of the following

commands:

• show interfaces transceiver

• show power inline

• show switch stack-port counters

• show nsf

• show slot

• show interfaces advertise

• show interfaces advanced firmware

• show lldp remote-device all

• show interfaces counters errors

• show fiber-ports optical-transceiver

• show process cpu

• show ethernet cfm errors (N4000 series only)

• show power inline firmware-version

• show version

• show interfaces transceiver properties

Syntax

• bgp — Show detailed information specific to BGP.

• bgp-ipv6 — Show detailed information specific to BGP IPv6.

• ospf — Show detailed information specific to OSPF.

• ospfv3 — Show detailed information specific to OSPFv3.

• bfd — Show detailed information specific to BFD.

• file — Write the output to a file in the local flash instead of the console.