Users Guide

Using the CLI 243
Privileged Exec Use the enable
command to enter
into this mode. This
mode is password
protected.
console#
Use the exit
command, or
press
<Ctrl>+<Z>
to return to the
User Exec mode.
Global
Configuration
From Privileged
Exec mode, use the
configure
command.
console(config)#
Use the exit
command, or
press
<Ctrl>+<Z>
to return to the
Privileged Exec
mode.
Line Interface From Global
Configuration
mode, use the line
command.
console(config-line)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
BGP Router
Configuration
From Global
Configuration
mode, use the
router bgp
command.
console(config-router)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
Table 2-5. Navigating CLI Command Modes (continued)
Command Mode Access Method Command Prompt Exit or Access
Previous Mode