Users Guide

Layer 2 Switching Commands 311
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the addresses in the Forwarding Database:
console#show mac address-table count
Capacity: 8192
Used: 109
Static addresses: 2
Secure addresses: 1
Dynamic addresses: 97
Internal addresses: 9
show mac address-table dynamic
Use the show mac address-table command in User Exec or Privileged Exec
mode to display all dynamic entries in the bridge-forwarding database.
Syntax
show mac address-table dynamic [address mac-address] [interface interface-
id] [vlan vlan-id]
• mac-address — A MAC address.
• interface-id — Display information for a specific interface. Valid
interfaces include Ethernet ports and port channels.
• vlan-id — Display entries for the specific VLAN only. The range is 1 to
4093.
Default Configuration
This command has no default configuration.