Users Guide

Layer 2 Switching Commands 317
This information is shown if the violation parameter is given:
Command History
Updated in 6.3.0.1 firmware.
Example
console(config)#show port-security static gi1/0/1
Number of static MAC addresses configured: 2
Static MAC address VLAN ID Sticky
------------------ ------- ------
00:01:ad:32:01 2 Yes
00:10:fe:48:19 2 No
Field Description
Statically Configured
MAC Address
Statically configured MAC addresses.
VLAN ID The VLAN identifier of the MAC address.
Sticky Indicates if the secure MAC address is sticky.
Field Description
MAC address The source MAC address of the last packet
discarded on the interface. These are packets with
unknown MAC addresses, e.g., as in the case of the
dynamic limit set to 0.
VLAN ID The VLAN identifier of the discarded packet, if
applicable.