Users Guide

Layer 2 Switching Commands 328

Example

console#show isdp entry Switch

Device ID N2000/N3000 Series Switch

Address(es):

IP Address: 172.20.1.18

Capability Router IGMP

Platform cisco WS-C4948

Interface Gi1/0/1

Port ID Gi1/0/1

Native VLAN 234

Holdtime 64

Advertisement Version 2

Entry last changed time 0 days 00:13:50

Version:

Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000 I9K91S-M),

Version 12.2(25)EWA9, RELEASE SOFTWARE (fc3)

Technical Support: http://www.cisco.com/techsupport

Compiled Wed 21-Mar-07 12:20 by tinhuang

show isdp interface

The show isdp interface command displays ISDP settings for the specified

interface.

Syntax

show isdp interface {all | interface-id}

• interface-id—An Ethernet interface identifier.

• all—Display all interfaces.

Default Configuration

There is no default configuration for this command.

Command Mode

Privileged Exec mode, Global Configuration mode and all Configuration

submodes