Users Guide

Layer 2 Switching Commands 329
User Guidelines
This command accepts an Ethernet interface identifier.
Example
console#show isdp interface all
Interface Mode
--------------- ----------
Gi1/0/1 Enabled
Gi1/0/2 Enabled
Gi1/0/3 Enabled
Gi1/0/4 Enabled
Gi1/0/5 Enabled
Gi1/0/6 Enabled
Gi1/0/7 Enabled
Gi1/0/8 Enabled
Gi1/0/9 Enabled
console#show isdp interface gigabitethernet 1/0/1
Interface Mode
--------------- ----------
Gi1/0/1 Enabled
show isdp neighbors
The show isdp neighbors command displays the list of neighboring devices.
Syntax
show isdp neighbors [interface-id][detail]
• interface-id—A Ethernet interface identifier.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes