Users Guide

Layer 2 Switching Commands 354
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show ip dhcp snooping
DHCP snooping is Disabled
DHCP snooping source MAC verification is enabled
DHCP snooping is enabled on the following VLANs:
11 - 30, 40
Interface Trusted Log Invalid Pkts
--------- -------- ----------------
Gi1/0/1 Yes No
Gi1/0/2 No Yes
Gi1/0/3 No Yes
Gi1/0/4 No No
Gi1/0/6 No No
show ip dhcp snooping binding
Use the show ip dhcp snooping binding command to display the DHCP
snooping binding entries.
Syntax
show ip dhcp snooping binding [{static | dynamic}] [interface interface-id |
port-channel port-channel-number] [vlan vlan-id]
• static | dynamic — Use these keywords to filter by static or dynamic
bindings.
• interface-id — The Ethernet interface for which to show bindings.
• port-channel-number—The port channel for which to show bindings.
• vlan-id — The VLAN identifier for which to show bindings.