Users Guide

Layer 2 Switching Commands 403
No link detected
Link Status : ................................. Err-disable/Down
Interface is error disabled due to loop detection
Link Status : ................................. Err-disable/None
The interface is error disabled due to a cause other than loop detection.
The possible causes for error disabled interfaces are:
Command History
Introduced in version 6.2.0.1 firmware. Updated in version 6.3.0.1 firmware.
Updated in version 6.5 firmware.
Term Parameter Description
ARP inspection arp-inspection ARP inspection auto-recovery.
BPDU Guard bpduguard BPDU guard auto-recovery.
Broadcast
Storm
bcast-storm Broadcast storm auto-recovery.
BPDU Storm bpdustorm BPDU storm auto-recovery.
Denial of
Service
denial-of-
service
Denial of Service auto-recovery.
DHCP Rate
Limit
dhcp-rate-limit DHCP rate limit auto-recovery.
Loop Protection loop-protect Loop protection auto-recovery.
Port MAC
Locking
port-security Port security MAC locking auto-recovery.
Multicast
Storm
mcast-storm Multicast storm auto-recovery.
SFP Mismatch sfp-mismatch SFP mismatch auto-recovery.
SFP Plus
Mismatch
sfpplus-
mismatch
SFP+ transceiver inserted in SFP port auto-
recovery.
Spanning Tree spanning-tree Spanning-tree auto-recovery.
UDLD udld UDLD auto-recovery.
Unicast Storm ucast-storm Unicast storm auto-recovery.