Users Guide

Layer 2 Switching Commands 406
Examples
The following examples display information about auto negotiation
advertisement.
Example #1
console#show interfaces advertise
Port Type Neg Operational Link Advertisement
--------- ------------------------------ -------- --------------------------
----
Gi1/0/1 Gigabit - Level Enabled 1000f, 100f, 10f
Gi1/0/2 Gigabit - Level Enabled 1000f, 100f, 10f
Gi1/0/3 Gigabit - Level Enabled 1000f, 100f, 10f
Gi1/0/4 Gigabit - Level Enabled 1000f, 100f, 10f
Gi1/0/5 Gigabit - Level Enabled 1000f, 100f, 10f
Gi1/0/6 Gigabit - Level Enabled 1000f, 100f, 10f
Example #2
console#show interfaces advertise gi1/0/1
Port: Gi1/0/1
Type: Gigabit - Level
Link State: Down
Auto Negotiation: Enabled
802.3az EEE: Disabled
Clock: Master
10000f 1000f 1000h 100f 100h 10f 10h
------ ----- ----- ----- ----- ----- ----
Admin Local link Advertisement no yes no yes no yes no
Oper Local link Advertisement no yes no yes no yes no
Oper Peer Advertisement no yes no yes no yes no
Priority Resolution - - - yes - - -
show interfaces configuration
Use the show interfaces configuration command in User Exec mode to
display the configuration for all configured interfaces.
Syntax
show interfaces configuration [{gigabitethernet unit/slot/port| port-channel
port-channel-number | tengigabitethernet unit/slot/port |
fortygigabitethernet unit/slot/port}]