Users Guide

Layer 2 Switching Commands 417
Port Description Link M VLAN
Channel State
------- ------------------------------ ------- - -------------------
Po1 Down H (4),5
show interfaces transceiver
Use the show interfaces transceiver command to display the optic static
parameters as well as the Dell EMC qualification.
Syntax
show interfaces transceiver [properties]
• properties—Displays the static parameters for the optics.
Default Configuration
This command has no default configuration.
Command Modes
User Exec, Privileged Exec modes.
User Guidelines
This command only supports the display of 10G and 40G transceivers.
Example
The following example shows the qualifications status of the optics on the
switch.
console#show interfaces transceiver
Port Dell EMC Qualified
------------- ------------------
Te1/0/9 Yes
Te1/0/11 Yes
Te1/0/13 N/A
Te1/0/15 No
Te1/0/17 No
The following example shows static parameters of the optics along with the
qualifications status.