Users Guide

Layer 2 Switching Commands 549
AE Priority = priority configured for iSCSI PFC (the VPT value above). This
TLV is sent in addition to any Application Priority TLV information received
from the configuration source. If the configuration source is sending iSCSI
application priority information, it is not necessary to enable iscsi cos to send
the iSCSI Application Priority TLV.
Command History
Modified in version 6.5 firmware.
Example
In the following example, iSCSI is globally enabled.
console(config)#iscsi enable
show iscsi
Use the show iscsi command to display the iSCSI configuration.
Syntax
show iscsi
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the iSCSI configuration.
console#show iscsi
iSCSI enabled
iSCSI CoS disabled
iSCSI vpt is 4