Users Guide

Layer 2 Switching Commands 732
User Guidelines
This command has no user guidelines.
Example
console#show diffserv service interface gigabitethernet 1/0/1 in
DiffServ Admin Mode........................... Enable
Interface..................................... Gi1/0/1
Direction..................................... In
No policy is attached to this interface in this direction.
show diffserv service brief
Use the show diffserv service brief command to display all interfaces in the
system to which a DiffServ policy has been attached.
NOTE: This command is not available on the N1500 Series switches.
Syntax
show diffserv service brief
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example shows how to display all interfaces in the system to
which a DiffServ policy has been attached.
console(config)#show diffserv service brief
DiffServ Admin Mode............................ Enable
Interface Direction OperStatus Policy Name
----------- ----------- ---------- -------------------------------