Users Guide

Security Commands 887
authentication restart
Use this command to set the interval after which reauthentication starts. This
timer starts only if all the authentication methods fail.
Use the no form of this command to set the authentication restart timer to
factory default value.
Syntax
authentication restart time
no authentication restart
• time —The time, in seconds, after which reauthentication starts, if all the
authentication methods have failed. Range: 300-65535.
Default Configuration
The default timer value is 300 seconds.
Command Modes
Interface Configuration (Ethernet) mode
User Guidelines
None
Example
console(config-if-Gi1/0/1)# authentication restart 1800
console(config-if-Gi1/0/1)# no authentication restart
clear (IAS)
Use the clear aaa ias-users command to delete all IAS users.
Syntax
clear aaa ias-users
Default Configuration
This command has no default configuration.