Users Guide

Security Commands 947
no msgauth
Default Configuration
The message authenticator attribute is enabled by default.
Command Mode
RADIUS Server Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(Config-auth-radius)#msgauth
name (RADIUS Server)
Use the name command to assign a list name to a RADIUS server. Use the no
form of the command to return the name to the default (unspecified). The
no form of the command does not require the user to enter the configured
name.
Syntax
name servername
no name
• servername—The name of the server list for a RADIUS server (Range: 1 to
32 characters).
Default Configuration
The default RADIUS server list name is Default-RADIUS-Server.
Command Mode
RADIUS Server Configuration mode