Administrator Guide

Dell EMC Networking CLI 107
Auto-VoIP
CDP Interoperability
show mac address-table Displays dynamically created entries in the
bridge-forwarding database.
PE
show mac address-table
address
Displays all entries in the bridge-forwarding
database for the specified MAC address.
UE or
PE
show mac address-table
count
Displays the number of addresses present in the
Forwarding Database.
PE
show mac address-table
dynamic
Displays all entries in the bridge-forwarding
database.
UE or
PE
show mac address-table
interface
Displays the mac forwarding table entries for a
specific interface.
UE or
PE
show mac address-table
multicast
Displays Multicast MAC address table
information.
PE
show mac address-table
static
Displays statically created entries in the bridge-
forwarding database.
PE
show mac address-table vlan Displays all entries in the bridge-forwarding
database for the specified VLAN.
UE or
PE
show port-security Displays the port-lock status. PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types .
switchport voice detect auto Enables the VoIP Profile on all the interfaces of
the switch.
GC or
IC
show switchport voice Displays the status of auto-voip on an interface
or all interfaces.
PE
Command Description Mode
a
clear isdp counters Clears the ISDP counters. PE
clear isdp table Clears entries in the ISDP table. PE
Command Description Mode
a