Administrator Guide

Layer 3 Routing Commands 1385
BGP table version is 5, local router ID is 0.0.0.100
Status codes: p - advertisement pending
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPref Path Origin
------------------- ---------------- ---------- ------- ------------- -----
172.20.1.0/24 172.20.101.1 10 100 20 10 i
p 20.1.1.0/24 172.20.101.1 100 20 ?
show ip bgp neighbors received-routes
This command displays the list of routes received from a specific neighbor.
The list includes both the accepted and rejected routes.
Syntax
show ip bgp [vrf vrf-name]neighbors ip-address {received-
routes|routes|rejected-routes}
• vrf vrf-name — Displays the aggregate address information associated
with the named VRF.
• ip-address—The IPv4 address of a BGP neighbor.
• Received-routes—Display the routes received by a particular neighbor
prior to filtering.
• Routes—Display both the received and advertised routes.
• Rejected-routes—Display the routes rejected from the specified neighbor.
Default Configuration
By default, information about the global VRF is shown.
Command Mode
Privileged Exec mode, Global Configuration mode and all sub-modes
User Guidelines
If the vrf-name argument is specified, information pertaining to that VRF is
displayed.
The following fields are displayed.