Administrator Guide

Layer 3 Routing Commands 1393
Command History
Introduced in version 6.2.0.1 firmware.
Updated in version 6.3.0.1 firmware.
Dynamic Neighbors The number of dynamically discovered neighbors
(current number, maximum number discovered, upper
limit allowed).
Default Metric The default value for the MED for redistributed routes.
Default Route Advertise Whether BGP is configured to advertise a default route.
Corresponds to default-information originate.
Redistributing
Source A source of routes that BGP is configured to
redistribute.
Metric The metric configured with the redistribute command.
Match Value For routes redistributed from OSPF, the types of OSPF
routes being redistributed.
Distribute List The name of the prefix list used to filter redistributed
routes, if one is configured with the distribute-list out
command.
Route Map The name of the route map used to filter redistributed
routes.
Neighbor The IP address of a neighbor.
ASN The neighbor’s ASN.
MsgRcvd The number of BGP messages received from this
neighbor.
MsgSent The number of BGP messages sent to this neighbor.
State The adjacency state. One of IDLE, CONNECT,
ACTIVE, OPEN SENT, OPEN CNFRM, EST.
Up/Down Time How long the adjacency has been in the
ESTABLISHED state, or, if the adjacency is down, how
long it has been down. In days:hours:minutes:seconds.
Pfx Rcvd The number of prefixes received from the neighbor.