Administrator Guide

Layer 3 Routing Commands 1403
Command History
Introduced in version 6.3.0.1 firmware.
Generation ID The version of the BGP routing table when this route last
changed.
Forwarding If this BGP route is used for forwarding.
Advertised To
Update Groups
The outbound update groups to which this route is advertised.
Local Preference The local preference, either as received from the peer or as set
according to local policy.
AS Path The AS Path. This form of show ip bgp displays AS Paths as
long as allowed by bgp maxas-limit.
Origin Value of the ORIGIN attribute.
Metric Value of the MED attribute, if included.
Type Whether the path is received from an internal or external peer.
IGP Cost The interior gateway cost (e.g., OSPF cost) to the BGP NEXT
HOP.
Peer (Peer ID) The IP address of the peer that sent this route, and its router
ID.
BGP Next Hop The BGP NEXT HOP attribute.
Atomic Aggregate If the ATOMIC AGGEGATE attribute is attached to the path.
Aggregator The AS number and router ID of the speaker that aggregated
the route.
Communities The BGP communities attached to the path.
Originator If the ORIGINATOR attribute is attached to the path, the
value of this attribute.
Cluster List If the CLUSTER_LIST attribute is attached to the path, the
sequence of cluster IDs in the cluster list.
Extended
Community
Route target value associated with the specified route
Term Description