Administrator Guide

Dell EMC Networking CLI 143
attribute 31 Alters the format of the MAC address sent in
the Calling-Station-Id attribute to the RADIUS
server when authenticating using 802.1X MAC
based authentication for an interface.
R
authentication event fail
retry
Sets the number of times authentication may
be reattempted by the user for the RADIUS
method for an IEEE 802.1X supplicant.
GC
auth-port Sets the port number for authentication requests
of the designated radius server
.
R
automate-tester Configures liveness checking. R
deadtime Improves Radius response times when a server is
unavailable by causing the unavailable server to
be skipped.
R
key Sets the authentication and encryption key for all
RADIUS communications between the switch
and the RADIUS daemon
.
R
msgauth Enables the message authenticator attribute to
be used for the RADIUS Authenticating server
being configured.
R
primary Specifies that a configured server should be the
primary server in the group of authentication
servers which have the same server name.
R
priority Specifies the order in which the servers are to be
used, with 0 being the highest priority.
R
radius server attribute 4 Sets the network access server (NAS) IP address
for the RADIUS server.
GC
radius server attribute 6 Enables the switch to send the RADIUS
Service-Type attribute in authentication
messages sent to the authentication server.
GC
radius server attribute 8 Enables the switch to send the RADIUS
Framed-IP-Address attribute in authentication
messages sent to the authentication server.
GC
Command Description Mode
a