Administrator Guide

Dell EMC Networking CLI 146
dot1x eapolflood Enables the flooding of received IEEE 802.1x
frames in the VLAN.
GC
dot1x initialize Begins the initialization sequence on the
specified port.
PE
mab Enables MAB on an interface. IC
default mab Configures the switch to transmit EAP or
CHAP credentials to the RADIUS server for
MAB-authenticated devices connected to the
interface.
IC
mab request format Configures the format of the MAC address sent
in the User-Name attribute.
IC,
GC
dot1x max-reauth-req Sets the maximum number of times that the
switch sends Extensible Authentication
Protocol EAP-Request/Identity frames to which
no response is received before restarting the
authentication process.
IC
dot1x max-req Sets the maximum number of times the switch
sends an EAP-request frame to the client before
restarting the authentication process.
IC
dot1x max-users Sets the maximum number of clients supported
on the port when MAC-based 802.1X
authentication is enabled on the port.
IC
dot1x port-control Enables manual control of the authorization
state of the port.
IC
dot1x re-authenticate Manually initiates a reauthentication of all
802.1x-enabled ports or a specified 802.1X
enabled port.
PE
dot1x reauthentication Enables periodic reauthentication of the client. IC
dot1x system-auth-control
monitor
Enables 802.1X globally. GC
dot1x timeout guest-vlan-
period
Sets the number of seconds that the switch
waits before authorizing the client if the client
is a dot1x unaware client.
IC
Command Description Mode
a