Administrator Guide

Layer 3 Routing Commands 1527
Routes with 1 Next Hop......................... 34
Routes with 2 Next Hops........................ 285
Routes with 3 Next Hops........................ 5
show ip route static
Use the show ip route static command to display the statically configured
routes, whether they are reachable or not.
Syntax
show ip route static [name]
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec modes, Global Configuration mode and all
Configuration submodes
User Guidelines
Use the optional name parameter to display the route name in addition to the
other information displayed
Example
console#show ip route static
Route Codes: R - RIP Derived, O - OSPF Derived, C - Connected, S - Static
B - BGP Derived, E - Externally Derived, IA - OSPF Inter Area
E1 - OSPF External Type 1, E2 - OSPF External Type 2
N1 - OSPF NSSA External Type 1, N2 - OSPF NSSA External Type 2
S U - Unnumbered Peer, L - Leaked Route
No default gateway is configured.
S 10.0.0.0/8 [1/0] via Vl10
S U 6.1.0.6/32 [0/0] via Vl20
S U 6.2.0.6/32 [0/0] via Vl20
show ip route preferences
Use the show ip route preferences command to display the default route
preference value for each origin.