Administrator Guide

Dell EMC Networking CLI 151
Management ACL
dos-control icmp Enables Maximum ICMP Packet Size Denial of
Service protections.
GC
dos-control l4port Enables L4 Port Denial of Service protection. GC
dos-control sipdip Enables Source IP Address = Destination IP
Address (SIP=DIP) Denial of Service protection.
GC
dos-control tcpflag Enables TCP Flag Denial of Service protections. GC
dos-control tcpfrag Enables TCP Fragment Denial of Service
protection.
GC
rate-limit cpu Configures the rate in packets-per-second for the
number of IPv6 data packets trapped to CPU
when the packet fails to be forwarded in the
hardware due to unresolved hardware address of
the destined IPv6 node.
GC
show dos-control Displays Denial of Service configuration
information.
PE
show system internal
pktmgr
Displays the configured CPU rate limit for
unknown packets in packets per second.
PE
storm-control broadcast Enables Broadcast storm control. IC
storm-control multicast Enables the switch to count Multicast packets
together with Broadcast packets.
IC
storm-control unicast Enables Unicast storm control. IC
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
deny (management) Defines a deny rule. MA
management access-class Defines which management access-list is used. GC
management access-list Defines a management access-list, and enters
the access-list for configuration.
GC
no priority (management) Removes a permit or deny condition from a
Management Access list.
MA
Command Description Mode
a