Administrator Guide

Layer 3 Routing Commands 1573
The following information is displayed if the operational mode of the MLD
interface is enabled:
Example
console#show ipv6 mld interface vlan 2
Interface................................... vlan 2
MLD Global Admin Mode....................... Enabled
MLD Interface Admin Mode.................... Disabled
MLD Operational Mode........................ Disabled
MLD Version................................. 2
Query Interval (secs)....................... 100
Query Max Response Time(milli-secs)........ 1111
Robustness.................................. 2
Startup Query Interval (secs).............. 31
Last Member
Query Interval
This value indicates the configured Maximum Response Time
inserted into Group-Specific Queries sent in response to Leave
Group messages.
Last Member
Query Count
This value indicates the configured number of Group-Specific
Queries sent before the router assumes that there are no local
members.
Field Description
Querier Status This value indicates whether the interface is a MLD querier or
non-querier on the subnet with which it is associated.
Querier Address The IP address of the MLD querier on the subnet the interface
with which it is associated.
Querier Up Time Time elapsed in seconds since the querier state has been
updated.
Querier Expiry
Time
Time left in seconds before the Querier losses its title as querier.
Wrong Version
Queries
Indicates the number of queries received whose MLD version
does not match the MLD version of the interface.
Number of Joins The number of times a group membership has been added on
this interface.
Number of Leaves The number of times a group membership has been removed on
this interface.
Number of Groups The current number of membership entries for this interface.