Administrator Guide

Dell EMC Networking CLI 157
Data Center Commands
Data Center Bridging
dot1as pdelay-threshold Configures the propagation delay threshold in
nanoseconds, above which an interface is not
considered capable of participating in the
802.1AS protocol.
IC
dot1as interval pdelay-loss Configures the number of Pdelay_Req messages
for which a valid response has not been
received, above which a port is considered to
not be exchanging peer delay messages with its
neighbor.
IC
show dot1as Displays the IEEE 802.1AS configuration for
an interface or globally.
PE
show dot1as statistics Displays the IEEE 802.1AS statistics for an
interface.
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
datacenter-bridging Enables an Ethernet interface to enter
DataCenterBridging mode.
IC
lldp dcbx version Configures the administrative version for the
Data Center Bridging Capability Exchange
(DCBX) protocol.
GC
lldp tlv-select dcbxp (dcb
enable)
Enables the LLDP to send DCBX TLVs, if
LLDP is enabled to transmit on the given
interface.
GC or
IC
lldp dcbx port-role Configures the port role to manual, auto-
upstream, auto-downstream and configuration
source.
IC
show lldp tlv-select Displays the Traffic Class to Traffic Class Group
mapping.
PE
Command Description Mode
a