Administrator Guide

Layer 3 Routing Commands 1623
show ip pim rp mapping
The show ip pim rp mapping command is used in User Exec and Privileged
Exec modes to display the mappings for the PIM group to the active
rendezvous points.
Syntax
show ip pim rp mapping [rp-address |candidate|static]
rp-address — An RP address.
Default configuration
There is no default configuration for this command.
Command Mode
User Exec, Privileged Exec modes, Global Configuration mode and all
Configuration submodes
User Guidelines
The following fields are displayed.
Example
console#show ip pim rp mapping candidate
RP Address.................................... 192.168.10.1
Group Address.............................. 224.1.2.1
Group Mask................................. 255.255.0.0
Origin..................................... BSR
C-RP Advertisement Interval (secs)......... 60
Next Candidate RP Advertisement (hh:mm:ss). 00:00:15
If no RP Group mapping exists on the router, the following message is
displayed:
Field Description
RP Address Address of the RP
Group Address Address of the multicast group.
Group Mask Mask for the group address.
Origin Origin from where this group mapping is learned.