Administrator Guide

Dell EMC Networking CLI 163
distance bgp (BGP Router
Configuration)
Sets the preference of BGP routes. BR
distance bgp (IPv6 Address
Family Configuration)
Sets the preference of BGP routes. IPAF
distribute-list prefix in Configures a filter that restricts the routes that
BGP accepts from all neighbors based on
destination prefix.
BR
IPAF
distribute-list prefix out
(BGP Router
Configuration)
Configures a filter that restricts the
advertisement of routes based on destination
prefix.
BR
distribute-list prefix out
(IPv6 Address Family
Configuration)
Applies an IPv6 prefix list to IPv6 routes
advertised via BGP.
IPAF
enable Globally enables BGP. BR
ip as-path access-list Creates an AS path access list. GC
ip bgp-community new-
format
Displays BGP standard communities in AA:NN
format.
GC
ip bgp fast-external-fallover Configures fast external failover behavior for a
specific routing interface.
IC
ip community-list Creates or configures a BGP community list. GC
ip extcommunity-list Creates an extended community list to
configure VRF route filtering.
GC
match extcommunity Matches BGP extended community list
attributes.
RM
maximum-paths (BGP
Router Configuration)
Specifies the maximum number of next hops
BGP may include in an Equal Cost Multipath
(ECMP) route derived from paths received
from neighbors outside the local autonomous
system.
BR
maximum-paths (IPv6
Address Family
Configuration)
Limits the number of ECMP next hops in IPv6
routes from external peers.
IPAF
Command Description Mode
a