Administrator Guide

Dell EMC Networking CLI 172
DHCPv6
network Defines a pool of IPv4 addresses for distributing
to clients.
DP
next-server Sets the IPv4 address of the TFTP server to be
used during auto-install.
DP
option Supplies arbitrary configuration information to
a DHCP client.
DP
service dhcp Enables local IPv4 DHCP server on the switch. GC
sntp Sets the IPv4 address of the NTP server to be
used for time synchronization of the client.
DP
show ip dhcp binding Displays the configured DHCP bindings. PE
show ip dhcp conflict Displays DHCP address conflicts for all relevant
interfaces or a specified interface.
PE
show ip dhcp global
configuration
Displays the DHCP global configuration. PE
show ip dhcp pool Displays the configured DHCP pool or pools. UE or
PE
show ip dhcp server statistics Displays the DHCP server binding and message
counters.
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
clear ipv6 dhcp Clears DHCPv6 statistics for all interfaces or for
a specific interface.
PE
dns-server (IPv6 DHCP Pool
Config)
Sets the IPv6 DNS server address which is
provided to a DHCPv6 client by the DHCPv6
server.
v6DP
domain-name (IPv6 DHCP
Pool Config)
Sets the DNS domain name which is provided
to a DHCPv6 client by the DHCPv6 server.
v6DP
ipv6 dhcp pool Enters IPv6 DHCP Pool Configuration mode. GC
ipv6 dhcp relay Configures an interface for DHCPv6 Relay
functionality.
IC
Command Description Mode
a