Administrator Guide

Dell EMC Networking CLI 174
ipv6 dhcp snooping limit Configures an interface to disable itself if the
rate of received DHCP messages exceeds the
configured limit.
IC
ipv6 dhcp snooping log-
invalid
Configures the port to log invalid received
DHCP messages.
IC
ipv6 dhcp snooping trust Configures the port as trusted. IC
ipv6 dhcp snooping verify
mac-address
Enables the additional verification of the source
MAC address with the client hardware address
in the received DHCP message.
GC
ipv6 verify binding Configures a static IP source guard binding. GC
ipv6 verify source Configures an interface to filter incoming
traffic from sources that are not present in the
DHCP binding database.
IC
show ipv6 dhcp snooping Displays the IPv6 DHCP snooping
configuration.
UE or
PE
show ipv6 dhcp snooping
binding
Displays the IPv6 DHCP snooping
configuration.
UE or
PE
show ipv6 dhcp snooping
database
Displays IPv6 DHCP snooping configurations
related to database persistency.
UE or
PE
show ipv6 dhcp snooping
statistics
Displays IPv6 DHCP snooping filtration
statistics.
UE or
PE
show ipv6 source binding Displays the IPv6 source guard configurations
on all ports, an individual port, or on a VLAN.
UE or
PE
show ipv6 verify Displays the IPv6 Source Guard configuration
on all interfaces or the specified interface.
UE or
PE
show ipv6 verify source Displays the Ipv6 source guard configurations
on all ports.
UE or
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a