Administrator Guide

Layer 3 Routing Commands 1794
Iftransit Delay Interval....................... 1
Retransmit Interval............................ 5
State.......................................... point-to-point
Metric......................................... 10
Neighbor State................................. Full
show ipv6 ospf virtual-link brief
Use the show ipv6 ospf virtual-link brief command to display the OSPFV3
Virtual Interface information for all areas in the system.
Syntax
show ipv6 ospf virtual-link brief
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the OSPF stub table.
console(config)#show ipv6 ospf virtual-link brief
Hello Dead Retransmit Transit
Area ID Neighbor Interval Interval Interval Delay
----------- ----------- ---------- ---------- ---------- --------
timers throttle spf
Use the timers throttle spf command to throttle the link-state-packets. Use
the no form of the command to return the configured parameters to their
default values.