Administrator Guide

Switch Management Commands 2126
Port name Sec
---------------- ------- -------------------- ------- ------ -------- --- --
----
Version 3 notifications
Target Address Type Username Security UDP Filter TO
Retries
Level Port name Sec
---------------- ------- ------------------ -------- ------ -------- --- ---
----
System Contact:
System Location:
Source Interface:
SNMP trap Client Source Interface.............. Default
show snmp engineid
Use the show snmp engineid command to display the ID of the local Simple
Network Management Protocol (SNMP) engine.
Syntax
show snmp engineid
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The SNMP engine ID uniquely identifies the SNMP agent to other SNMPv3
stations. The SNMP engine ID is not cleared by the clear config command.
The SNMP engine ID must be unique for the administrative domain.
Example
The following example displays the SNMP engine ID.