Administrator Guide

Dell EMC Networking CLI 214
logging cli-command Enables CLI command logging. GC
logging Configures a SYSLOG server GC
logging audit Enables switch auditing. GC
logging buffered Enables logging to the in-memory log. GC
logging console Enables logging to the console. GC
logging facility Configures the facility to be used in SYSLOG
messages.
GC
logging file Enables logging to the persistent (on flash) log. GC
logging monitor Enables logging messages to telnet and SSH
sessions with the default severity level.
GC
logging on Enables error messages logging. GC
logging protocol Logs messages in RFC5424 of RFC 3164
format.
GC
logging snmp Enables SNMP Set command logging. GC
logging source-interface Selects the interface from which to use the IP
address in the source IP address field of
transmitted SYSLOG packets.
GC
logging traps Sets the lowest severity level at which SNMP
traps are logged.
GC
logging web-session Enables web session logging. GC
port Specifies the port number on which the
SYSLOG server listens for messages.
L
show logging Displays the state of logging and the messages
stored in the internal buffer.
PE
show logging file Displays the state of logging and the messages
stored in the logging file.
PE
show syslog-servers Displays the SYSLOG server settings. PE
terminal monitor Enables the display of logging messages over a
telnet of SSH session.
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a