Administrator Guide

Switch Management Commands 2263
Default Configuration
This command has no default configuration.
Command Mode
User Exec mode, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
This command is only available on switches with a power monitoring circuit.
It is not available on the Dell EMC Networking N1100-ON Series switches.
Examples
console#show system power
Power Supplies:
Unit Description Status Average Current Since
Power Power Date/Time
(Watts) (Watts)
---- ----------- ----------- ---------- -------- -------------------
1 System OK 39.8 39.8
1 PS-1 Failure
1 PS-2 No Power N/A N/A 01/01/1970 00:00:00
show system temperature
Use the show system temperature command to display information about the
system temperature and fan status.
Syntax
show system temperature
Default Configuration
This command has no default configuration.