Administrator Guide

Switch Management Commands 2288
Time Ranges Commands
Time ranges are used with time-based ACLs to restrict their application due
to specific time slots.
This section explains the following commands:
time-range [name]
Use the time-range command to globally enable or disable the event
notification service of the time range component. If disabled, ACLs using
time ranges are not started.
Use the optional name parameter to create a time range consisting of one
absolute time entry and/or one or more periodic time entries. If a time range
by this name already exists, this command enters Time-Range Configuration
mode to allow updating the time range entries.
Use the no form of the command to disable the event notification service.
Use the no form of this command with the optional name parameter to delete
a time-range identified by name .
Syntax
time-range [ name ]
no time-range [ name ]
• name—A case-sensitive alphanumeric string from 1 to 31 characters
uniquely identifying the time range. An alpha-numeric string is defined
as consisting of only alphabetic, numeric, dash, underscore, or space
characters.
Default Configuration
Time range event notification is enabled by default.
time-range [name] periodic
absolute show time-range