Administrator Guide

Switch Management Commands 2313
BYY2a2YOtjoGcY7sBiEPJQbji+U9W7xCjz1q/Un8YRshdW/7dNmTwFTh55S2QmXV
RN/UVjShWRmMn0vbiyyzHaKAON+9fBt3rMQCYiRyEuWISb31/3SlWY9iQJezwoOh
ZX9DEgnxvzUjLMoYVRhqCE0+LoBWikhy6ROS+b4cubJpzTdv2n+zY8dbM9jSwiky
6rFhVznvamGap8Aw0rUnEvU5kM9MM0hsVU95H+QzWJwychy9Fhh1zhYzNTpr+VQs
c4psyXEd8GE=
-----END CERTIFICATE-----
Issued by: Dell Networking
Valid from to Oct 22 17:46:02 2017 GMT
Subject: /CN=DELL/OU=Dell Networking/L=Round Rock/ST=TX/C=US/emailAddress=
no-reply@dell.com
Fingerprint: FA06E0DD138FA22A4D696A80171FF3D8
crypto certificate request
Use the crypto certificate request command to generate and display a
certificate request for HTTPS. This command takes you to Crypto Certificate
Request mode.
Syntax
crypto certificate number request
number — Specifies the certificate number. (Range: 1–2)
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode
User Guidelines
Use this command to generate a certificate request to send to a Certification
Authority. The certificate request is generated in Base64-encoded X.509
format.
Before generating a certificate request, you must first generate a self-signed
certificate using the crypto certificate generate command in Global
Configuration mode in order to sign the certificate request. Make sure to
reenter the identical values in the certificate request fields as were entered in
the self-signed certificate generated by the crypto certificate generate
command.