Administrator Guide

Using the CLI 244
IPv6 Address
Family
Configuration
From BGP Router
Configuration
mode, use the
address-family ipv6
command.
console (config-router-af)#
To exit to BGP
Router
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
Management
Access-List
From Global
Configuration
mode, use the
management
access-list
command.
console(config-macl)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
Policy-Class-Map From Global
Configuration
mode, use the
policy-map class
command.
console(config-policy-map)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
Class-Map From Global
Configuration
mode, use the class-
map command.
console(config-classmap)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
Table 2-5. Navigating CLI Command Modes (continued)
Command Mode Access Method Command Prompt Exit or Access
Previous Mode