Administrator Guide

Layer 2 Switching Commands 288
show access-lists interface
Use the show access-lists interface command to display interface ACLs.
Syntax
show access-lists interface {interface-id {in | out}} | control-plane
• interface-id — The interface identifier (Ethernet, port-channel, or
VLAN).
• in— Show the ingress ACLs.
• out— Show the egress ACLs.
• control-plane— Show the control plane ACLs.
Default Configuration
No ACLs are configured by default.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
There are no user guidelines for this command.
Examples
console#show access-lists interface control-plane
ACL Type ACL Name Sequence Number
-------- ------------------------------- ---------------
IPv6 ip61 1000
show ip access-lists
Use the show ip access-lists command to display an IP ACL and time-range
parameters.
Syntax
show ip access-lists [accesslistname]