Administrator Guide

Layer 2 Switching Commands 327

Example

console#show isdp entry Switch

Device ID N2000/N3000 Series Switch

Address(es):

IP Address: 172.20.1.18

Capability Router IGMP

Platform cisco WS-C4948

Interface Gi1/0/1

Port ID Gi1/0/1

Holdtime 64

Advertisement Version 2

Entry last changed time 0 days 00:13:50

Version:

Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000 I9K91S-M),

Version 12.2(25)EWA9, RELEASE SOFTWARE (fc3)

Technical Support: http://www.cisco.com/techsupport

Compiled Wed 21-Mar-07 12:20 by tinhuang

show isdp interface

The show isdp interface command displays ISDP settings for the specified

interface.

Syntax

show isdp interface {all | interface-id}

• interface-id—An Ethernet interface identifier.

• all—Display all interfaces.

Default Configuration

There is no default configuration for this command.

Command Mode

Privileged Exec mode, Global Configuration mode and all Configuration

submodes

User Guidelines

This command accepts an Ethernet interface identifier.