Administrator Guide

Layer 2 Switching Commands 328
Example
console#show isdp interface all
Interface Mode
--------------- ----------
Gi1/0/1 Enabled
Gi1/0/2 Enabled
Gi1/0/3 Enabled
Gi1/0/4 Enabled
Gi1/0/5 Enabled
Gi1/0/6 Enabled
Gi1/0/7 Enabled
Gi1/0/8 Enabled
Gi1/0/9 Enabled
console#show isdp interface gigabitethernet 1/0/1
Interface Mode
--------------- ----------
Gi1/0/1 Enabled
show isdp neighbors
The show isdp neighbors command displays the list of neighboring devices.
Syntax
show isdp neighbors [interface-id][detail]
• interface-id—A Ethernet interface identifier.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The information displayed varies based upon the information received from
the ISDP neighbor.