Administrator Guide

Layer 2 Switching Commands 384
Syntax
show arp access-list [acl-name]
• acl-name — A valid ARP ACL name (Range: 1–31 characters).
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec, Global Configuration mode and all Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show arp access-list
ARP access list H2
permit ip host 1.1.1.1 mac host 00:01:02:03:04:05
permit ip host 1.1.1.2 mac host 00:03:04:05:06:07
ARP access list H3
ARP access list H4
permit ip host 2.1.1.2 mac host 00:03:04:05:06:08
show ip arp inspection
Use the show ip arp inspection command to display the Dynamic ARP
Inspection and status.
Syntax
show ip arp inspection [interfaces [interface-id] | statistics [vlan vlan-list] |
vlan vlan-list]
• interfaces [interface-id] — Display the Dynamic ARP Inspection
configuration on all the DAI enabled interfaces. Giving an interface
argument, it displays the values for that interface only.