Administrator Guide

Layer 2 Switching Commands 410
Port InTotalPkts InUcastPkts InMcastPkts InBcastPkts
--------- ---------------- ---------------- ---------------- ---------------
Te1/0/13 21614369 21614360 9 0
Port OutTotalPkts OutUcastPkts OutMcastPkts OutBcastPkts
--------- ---------------- ---------------- ---------------- ---------------
Te1/0/13 40620964 40620547 19 398
FCS Errors: ................................... 0
Single Collision Frames: ...................... 0
Late Collisions: .............................. 0
Excessive Collisions: ......................... 0
Multiple Collisions: .......................... 0
Received packets dropped > MTU: ............... 0
Transmitted oversized packets: ................ 40618318
Internal MAC Rx Errors: ....................... 0
Received Pause Frames: ........................ 0
Transmitted Pause Frames: ..................... 0
Receive Packets Discarded: .................... 0
Transmit Packets Discarded: ................... 0
Received PFC Frames: .......................... 0
Transmitted PFC Frames: ....................... 0
show interfaces debounce
Use the show interfaces debounce command to list the debounce
information for one or multiple interfaces. If no parameter is given, all
Ethernet interfaces are shown.
Syntax
show interfaces debounce [ interface-id ]
• interface-id—An Ethernet interface identifier (i.e., a 1G, 10G, or 40G
Ethernet interface) in standard interface format.
Default Configuration
Ethernet interfaces have a 100 ms debounce time enabled.
Command Mode
Exec mode, Privileged Exec, Global Configuration and all show modes.