Administrator Guide

Layer 2 Switching Commands 417
console#show interfaces transceiver properties
Yes: Dell EMC Qualified No: Not Qualified
N/A : Not Applicable
Port Type Media Serial Number Dell EMC Qualified
------------ ------- --------------- -------------------- ------------------
Te1/0/9 SFP+ 10GBASE-LRM ANF0L5J Yes
Te1/0/11 SFP+ 10GBASE-LRM ANF0L5R Yes
Te1/0/13 SFP 1GBASE-SX PCC1PT5 N/A
Te1/0/15 SFP+ 10GBASE-SR AD1125A002R No
Te1/0/17 SFP+ 10GBASE-SR AD0815E00PC No
show interfaces trunk
Use the show interfaces trunk command to display active trunk interface
information.
Syntax
show interfaces trunk [interface-id]
• interface-id—An Ethernet or port channel interface identifier.
Default Configuration
This command has no default configuration.
Command Mode
User Exec mode, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
This command displays Ethernet interfaces configured in trunk or general
mode that are link up. Port channels are also shown if the port channel status
is up.The fields displayed are as follows:
• Port—The Ethernet or port channel interface name.
• Description—The configured port description.
• Port Chnl—Shows the port channel if the Ethernet interface is a member
of a port channel.
• M—The configured mode (T for trunk and G for General).