Administrator Guide

Layer 2 Switching Commands 540
Default Configuration
There is no default configuration for this command.
Command Modes
User Exec, Privileged Exec (all show modes)
User Guidelines
The filter type is one of the following values:
• ipv4-mac: IPv4 plus MAC address filtering
• ip: IPv4 address filtering
• ipv6: IPv6 address filtering
• ipv6-mac: IPv6 plus MAC address filtering
• N/A: No filtering is configured on the interface
Example
console(config-if-Gi1/0/5)#show ip verify
Interface Filter Type
----------- -----------
Gi1/0/1 ip
Gi1/0/2 ipv4-mac
Gi1/0/3 N/A
Gi1/0/4 N/A
Gi1/0/5 ipv4-mac
Gi1/0/6 N/A
Gi1/0/7 N/A
Gi1/0/8 N/A
Gi1/0/9 N/A
console(config-if-Gi1/0/5)#show ip verify interface gi1/0/5
Interface Filter Type
----------- -----------
Gi1/0/5 ipv6-mac
show ip verify source
Use the show ip verify source command to display the bindings configured on
a particular interface or all interfaces.