Administrator Guide

Layer 2 Switching Commands 573
Syntax
show lldp med remote-device {gigabitethernet unit/slot/port |
tengigabitethernet unit/slot/port | all}
show lldp med remote-device detail {gigabitethernet unit/slot/port |
tengigabitethernet unit/slot/port}
• all — Indicates all valid LLDP interfaces.
• detail — Includes a detailed version of remote data for the indicated
interface.
Command Mode
Privileged Exec, Global Configuration mode and all Configuration submodes
Default Value
Not applicable
Example
console#show lldp med remote-device all
LLDP Remote Device Summary
Local
Interface RemoteID Device Class
--------- ---------- --------------------
Gi1/0/13 1 Class I
Gi1/0/16 2 Class II
Gi1/0/23 6 Not Defined
Console#show lldp med remote-device detail Gi1/0/1
LLDP MED Remote Device Detail
Local Interface: 1/0/1
Capabilities
MED Capabilities Supported: capabilities, networkpolicy, location,
extendedpse
MED Capabilities Enabled: capabilities, networkpolicy
Device Class: Endpoint Class I
Network Policies
Media Policy Application Type : voice
Vlan ID: 10
Priority: 5