Administrator Guide

Layer 2 Switching Commands 596
User Guidelines
A VPC domain ID must be configured for this command to display the VPC
status.
Only the Primary switch maintains the member status of the Secondary
switch. The Secondary switch does not maintain or show the status of the
Primary switch peer members.
A VPC instance may show as enabled even if all of the port-channels that are
members of the VPC are disabled or all of the links in the port channels are
disabled. A VPC will show as disabled if peer-link (or DCPDP) connectivity is
lost.
The Keepalive admin status field shows the status of the peer-link protocol.
The VPC operational status shows the overall MLAG status.
The Peer detection admin status field shows the status of the DCPDP
protocol.
Example
console#show vpc brief
VPC domain id is not configured.
console#show vpc brief
VPC Domain ID...................................2
VPC admin status................................Disabled
Keepalive admin status..........................Disabled
VPC operational status..........................Disabled
Self role.......................................None
Peer role.......................................None
Peer detection admin status.....................Disabled
Operational VPC MAC.............................F8B1.562B.A1D6
Operational VPC system priority................ 100
Peer-Link details
-----------------
Interface.......................................Po1
Peer-link admin status..........................Enabled
Peer-link STP admin status......................Disabled
Configured VLANs................................1,10,11,12,13,14,15,16,17
VPC Details
-----------