Administrator Guide

Security Commands 920
User Guidelines
This command has no user guidelines.
Example
console(config)#mail-server 10.131.1.11
console(mail-server)#username admin
Command History
Example added in the 6.4 release.
password (Mail Server Configuration Mode)
Use the password command in Mail Server Configuration mode to configure
the password required to authenticate to the e-mail server. Use the no form of
the command to revert the password to the default value.
Syntax
password password
no password
Default Configuration
The default value for password is admin.
Command Mode
Mail Server Configuration
User Guidelines
This command has no user guidelines.
Example
console(config)#mail-server 10.131.1.11
console(mail-server)#password admin123
Command History
Example added in the 6.4 release.