Users Guide

Security Commands 1007
Syntax
attribute 25 include-in-access-req
no attribute 25 include-in-access-req
Default Configuration
By default, the Class attribute is included in the accounting messages sent to
the accounting server if received in the Access-Accept from the RADIUS
authentication server.
Command Mode
RADIUS Server Configuration
User Guidelines
The switch sends the Class attribute value supplied by the RADIUS server in
the Access-Accept message if enabled. If disabled, the Class attribute
received from the RADIUS server is ignored. The Class attribute may be up to
16 octets in length
Command History
Introduced in version 6.3.0.1 firmware.
Example
console#conf
console(config)#radius server auth 4.3.2.1
console(config-auth-radius)#attribute 25 include-in-access-req
attribute mac format
Use the attribute mac format command to configure the format of the
Original-Called-Number (30), Calling-Station-ID (31), NAS-Identifier (32)
attributes sent to the RADIUS server in Access-Request and Acct-Request
messages for a RADIUS server. Use the no form of the command to return the
MAC address format to the default.